Intelligent E1 Channel Bank, PRI (Euro ISDN) ISDN Multiplexer, E1 Drop-Insert Multiplexer

IP WAN Router with an Integrated T1 DSU/CSU
IP WAN Router with an Integrated E1 DSU/CSU
 

 

 

IP·Express XLB-T1 / IP·Express·XLB-E1
Features
Technical Specifications

AC Back Panel

DC Back Panel

Other Products
IP-Tube-T1-Echo Canceller

IP-Tube-E1-Echo Canceller

T1 over IP
E1 over IP

Multiplexers
Channel Banks
Voice Compression
Echo Cancellers
T1 E1 Converter

Test Instruments
Digital Multimeter
Analog Multitester
Clamp Meter

IP•Express XLB-T1 / IP•Express XLB-E1

IP WAN Router with an Integrated T1 DSU/CSU
IP WAN Router with an Integrated E1 DSU/CSU
IP·Express XLB-T1 / IP·Express XLB-E1s are very reliable, high performance and cost effective IP WAN Routers for interconnecting remote LANs, for shared high performance Internet Access and for high performance MPEG IP Video delivery. The Integration of the T1 / E1 CSUs provides for a complete solution with a straight forward configuration. It is great for:
 
• Shared Internet Access
• Branch Office Connections
• Education District Networking
• Multimegabyte File Transfers
• MPEG Video Distribution
Features:

IP·Express XLB-T1 / IP·Express XLB-E1 is used extensively with Frame Relay WANS for high performance branch office connectivity and Internet access. Internet Service Providers deploy the IP·ExpressXLT as a customer premise solution. Corporations and Government agencies select the IP·ExpressXLT for its ease of installation and reliability.

IP Multicast support is utilized to distribute MPEG video similtaneously to multiple decoders. IPExpress•XLT1•RED / IP·Express XLB-E1-RED model has the Redundant IP Video configuration that automatically switches to a secondary Encoder's IP Video Stream for mission critical broadcasts.
 
Security is provided with Full On Source, Destination Address; Port and Flag IP Packet filtering. Interconnectivity is able to be selectively controlled at the network, device and application layers.
MPEG IP Video Redundancy Switch
REDundant IP Video configuration that automatically switches from the Primary to a Secondary Encoder's IP Video Stream for mission critical broadcasts and is available with the
IPExpress•XLB•T1•RED / IPExpress•XLB•E1•RED. A one second absence of IP packets from the Primary Encoder results in the switch to the Secondary Encoder. The WAN bandwidth is reserved for a single feed. 
  Technical Specifications
LAN Network Interface:
· One10BaseT Ethernet

LAN Network Protocols Supported:
· IP, TCP, UDP, RIP, ICMP, BOOTP
· IPMulticast
· IP Video Stream Redundancy (Optional)
· AppleTalk (Configuration Only)

WAN Network Interfaces:
· One T1/FracT1 (or One E1/FracE1) CSU/DSU port

WAN Network Protocols Supported:

· PPP
  (RFC 1548, RFC 1332, RFC 1334, PAP)
· Frame Relay
  (ANSI ANNEX D, LMI, RFC 1420)

T1/Fractional T1 (or E1/Fractional E1) Specifications:
· Framing - ESF or D4
· Coding - B8ZS (HDB3 for E1) or AMI
· Supports DS0 assignments from 1 to 24
  (1 to 31 for E1)

Regulatory:
· Safety -IEC60950
· EMC - CFR 47 Part 15 Sub Part B:2002
            EN55022:1994+A1&A2
            EN55024, ICES-003 1997
            CISPR 22 Level A

· Telecom - Part68

TFTP Upgrade Capable (Flash ROMs):
· IPTube is operational during upgrade

Management:
· Telnet support with Edit and Paste Templates
· Console Port for Out of Band Management

· SNMP support (MIB I, MIB II)

· Remote configuration, monitoring, & reset

Console Port:
·RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:

· 24VAC, 1.0A; International Adapters Available
· 12-36 VDC Optional
· -48 VDC Optional
 

Diagnostic:
· Loopback Tests
      Network
      Internal
      Framer
      Payload
· Bert Tests
      2E07,2E11,2E15,QRSS

Dimensions:
· 9" (L) x 7" (W) x 1.50" (H)

AC Power Back Panel
Standard 10BaseT Ethernet interface
Telco: T1 / E1 interface for direct connection to a Telecom Circuit RJ48S
Console Port Connector · RJ 45 to DB 9 Female Adapter provided
24 VAC, 1.0A  International Adapters Available
 
DC Power Back Panel
Standard 10BaseT Ethernet interface
Telco: T1 / E1 interface for direct connection to a Telecom Circuit RJ48S
Console Port Connector · RJ 45 to DB 9 Female Adapter provided
12-26 VDC, 1.0A International Adapters Available

 

Home     |     About Us     |    Products    |    Testing Instruments
Contact Us    |    E-mail


Bhumika Enterprises
Lakeview Place
2770 Aquitaine Ave, Suite # 804
Mississauga, ON L5N 3K5
Phone: + 1 (416) 930 2931

E-mail: info@bhumika.ca
Website: http://www.bhumika.ca

Technical Specifications are subject to change without notice.
Windows is the registered Trademark of Microsoft Corporation, USA.
All other trademarks are the ownership of their respective owners.