Intelligent E1 Channel Bank, PRI (Euro ISDN) ISDN Multiplexer, E1 Drop-Insert Multiplexer

Mutiprotocol WAN Router with Two T1 DSU/CSU
Mutiprotocol WAN Router with Two E1 DSU/CSU
 
 

 

 IP·Express XLB-T1 / IP·Express·XLB-E1
 Features
Technical Specifications
Back Panel

Other Products
IP-Tube-T1-Echo Canceller
IP-Tube-E1-Echo Canceller
T1 over IP
E1 over IP

Multiplexers
Channel Banks
Voice Compression
Echo Cancellers
T1 E1 Converter

Test Instruments
Digital Multimeter
Analog Multitester
Clamp Meter

ExpressRouter MLBH-T1 / ExpressRouter MLBH-E1
Multiprotocol WAN Router with Two T1 DSU/CSUs
Multiprotocol WAN Router with Two E1 DSU/CSUs
 
ExpressRouter MLBH-T1 / ExpressRouter MLBH-E1 is a very reliable, high performance and cost effective IP WAN Router for interconnecting two remote LANs and for shared high performance Internet Access. The Integration of the T1 / E1 CSUs provides for a complete solution with a straight forward configuration. It is great for:
·Shared Internet Access
·Branch Office Connections
·Education District Networks
·Multimegabyte File Transfers
Features:

Dual Independent Connections
Inverse Multiplexing is an optional feature of the ExpressRouter·MLBH-T1 / ExpressRouter MLBH-E1. The Inverse Multiplexor delivers 3 Megabits of interconnectivity over Dedicated and Frame Relay WANs. Built in T1 / E1 line fault detection provides for automatic bandwidth backup. The Inverse Multiplexor is ideal for:
 
• Very Large Multimegabyte File Transfers
• Mission Critical Fault Tolerant Interconnects
• IP Video Streams
3Mbps Inverse Multiplexed Fault Tolerant Connection
  Technical Specifications
LAN Network Interface:
· One 10BaseT Ethernet

LAN Network Protocols Supported:
· IP, TCP, UDP, RIP, ICMP, BOOTP
· IPX (RIP, SAP)
· AppleTalk
  (DDP, RTMP, ZIP, NBP, ATP, ADSP, AEP)
· NAT/PAT (RFC 1631)

WAN Network Interfaces:
· Two T1/FracT1 (or two E1/FracE1)CSU/DSU port

WAN Network Protocols Supported:
· PPP
  (RFC 1548, RFC 1332, RFC 1334, PAP)
· Frame Relay
  (ANSI ANNEX D, LMI, RFC 1420)

T1/Fractional T1 Specifications:
· Framing - ESF or D4
· Coding - B8ZS (HDB3 for E1) or AMI
· Supports DS0 assignments from 1 to 24 (1 to 31)		 TFTP Upgrade Capable (Flash ROMs):
· IPExpressMLBH-T1 / ExpressRouter MLBH-E1 is operational during upgrade

Management:
· Telnet support with Edit and Paste Templates
· Console Port for Out of Band Management
· SNMP support (MIB I, MIB II)
· Remote configuration, monitoring, & reset
· EngageView is a configuration application for    AppleOS

Console Port:
· RJ45 to DB9 Female DCE adapter shipped with product. Enables direct connection to Com1.

Power:
· 24VAC, 1.0A; International Adapters Available

Dimensions:
· 9" (L) x 5.5" (W) x 1.50" (H)

 
Back Panel
T1-1 / E1-1 : T1 / E1 DSU/CSU Interface for WAN connectivity via PPP or Frame Relay
Console Port Connector · RJ 45 to DB 9 Female Adapter provided
T1-2 / E1-2: Second T1 / E1 DSU/CSU Interface for WAN connectivity via PPP or Frame Relay
Standard 10BaseT Ethernet interface

 

Home     |     About Us     |    Products    |    Testing Instruments
Contact Us    |    E-mail


Bhumika Enterprises
Lakeview Place
2770 Aquitaine Ave, Suite # 804
Mississauga, ON L5N 3K5
Phone: + 1 (416) 930 2931
E-mail: info@bhumika.ca
Website: http://www.bhumika.ca

Technical Specifications are subject to change without notice.
Windows is the registered Trademark of Microsoft Corporation, USA.
All other trademarks are the ownership of their respective owners.