SANWA:CP-7D

Analog Multitester

CP-7D
INTRODUCTION
This is a pocket-sized tester of 23mm in thickness only even with test leads provided therewith including a range dial and a 0-ohm adjusting knob.
And also, the tester is 119mm in height and 23mm in width, and is small enough to fit the palm of a hand. Its meter portion is magnified largely enough to be equal to a large-sized tester. An indicator needle is 47mm in length and its deflection is 95mm in width.

FEATURES
23mm only in thickness. Compact-sized so as to perfectly fit in the palm of a hand.
Wide-scale Meter comparable to a large-scale tester including a mirror provided
Safety and operability persuited because of fixed type test leads adopted
Optional notebook type carrying case available which fits in the body type.
Metal oxide film resistor with high precision, flammability, and type is adopted.
1.5V battery check terminal provided.
Circuit protected using fuses and diodes.

SPECIFICATIONS
Meter sensitivity__78.5A
Range switch__ Manual
Accuracy guaranteed temperature & humidity range__ 232'c 45-75% RH
Operating temperature humidity range__ 3-43c, 80% RH Max. No condensation
Power supply__ R6 x 1
Fuse__ 1A/250V (20mm)
Accessory__ Instruction manual, Test leads (TL-84)
Dimension__119 x 82 x 23 mm
Weight__ Approx. 140g

Function	Range	Accuracy	Input Resistance	Remarks
DCV	250m/2.5/10/50/250/ 500/1000V	3% of max. scale	4k	-
ACV	10/50/250/500/1000V	4% of max. scale	4k	-
DCA	0.25m/25m/500m	3% of max. scale	-	Voltage drop : 250mV(Fuse resistance not included)
RESISTANCE	2k/20k/1M	3% of scale length	-	Max. scale 1M Open circuit voltage : 1.5V
Load Current (Li)	0 - 74mA/7.4mA/150A	-	-	-
Battery Load Voltage	0.9.....1.5V
Low Level Frequency	-20dB.....+62dB

Bhumika International Inc.
Ph: +1(416) 930 2931
E-mail: info@bhumika.ca
Website: http://www.bhumika.ca

Technical Specifications are subject to change without notice.
Windows is the registered Trademark of Microsoft Corporation, USA.
All other trademarks are the ownership of their respective owners.