Digital Multimeter

CD800

INTRODUCTION This is a case-integrated DMM provided with both a digital bar graph of 3,200 counts and an analog bar graph display. In the digital display mode, small numerical values up to 3,200 counts can be read, while in the analog display mode, it is suitable for reading rough values. The case is of an integrated-type, and a 3-way type of "use", "carry", and "store" high functions (performance). The tester is provided with devices for the use suitable in any time and place, is shock-proof, and has full durability, additionally meeting International Standard for Safety IEC1010. The tester features a cover made of a flammability, test leads, and consideration is made for structure design of test leads, putting emphasis on safety in high voltage measurement.

FEATURES
Wide dynamic range of 3200 count display and an analog bar graph.
With a magazine for storing the test leads.
Hard-burn material is used on the rear case.
A space is provided for setting a flat chip resister, that makes easier to
measure the flat chip resister, of which respective sizes are1.6mm (L)
x 0.8mm(W), 2mm(L) x1, 25mm(W) and 3.1mm(L) x1.55mm(W).
With a handy hand strap.
In conformity with IEC1010.
Data hold function to hold measured value.

SPECIFICATIONS
Operating principle__ Dual slope integration
Display__ 3200 counts in LCD
Bar Graph__ 32 segments max.
Range switch__ Auto range
Over display__ "OL" mark indication
Polarity switch-1__ Auto
Low battery indication__"BT" symbol
Sampling__ Approx.2 times/sec
Bar Graph 2__ Approx.12 times/sec
Accuracy guaranteed temperature& humidity ranges__18'c- 25'c, 80%R.H. Max.
No condensation
Operating temperature& humidity range__0'c- 40'c, 80%R.H.Max.No condensation
Storage temperature humidity range__-10'c-50'c, 70%R.H. Max.No condensation
Power supply __R6 x 2
Consuming power__Approx.1.8mW Typ
Operating time__750 hours
Dimension__176 x 104 x 46mm
Weight__Approx.340g
Instruction manual__English
Safety approval __In conformity with IEC1010

Function	Range	Accuracy	Resolution	Input resistance	Remarks
DCV	320mV	(0.8%rdg+2dgt)	100V	100M	-
	3.2V	(1.2%rdg+2dgt)	1mV	11M
	32V		10mV	10M
	320V		100mV
	600V		1V
ACV	3.2V	(1.8%rdg+4dgt)	1mV	11M	Accuracy in the case of sine wave AC : 45...400Hz
	32V		10mV	10M
	320V		100mV
	600V		1V
DCmA	32mA	(1.3%rdg+2dgt)	10A	5	-
	320mV	(1.5%rdg+2dgt)	100A
ACmA	32mA	(2.0%rdg+5dgt)	10A	5	Accuracy in the case of sine wave AC : 45 to 400Hz
	320mV	(2.4%rdg+5dgt)	100A
RESISTANCE	320	(1.2%rdg+2dgt)	100m	Open circuit votage : Approx. 1.3V The measuring current changes according to the resistance of the resistor to measure.
	3.2k		1
	32k		10
	320k		100
	3.2M	(2.0%rdg+4dgt)	1k
	32M	(10%rdg+5dgt)	10k
CONTINUITY	Buzzer sounds at approx. 20 max.
DIODE TEST	Open circuit voltage : Approx. 3V

Home     |     About Us     |    Products     |    Telecom Systems    |    Contact Us    |    E-mail

Bhumika International Inc.
Ph: +1(416) 930 2931
E-mail: info@bhumika.ca
Website: http://www.bhumika.ca

Technical Specifications are subject to change without notice.
Windows is the registered Trademark of Microsoft Corporation, USA.
All other trademarks are the ownership of their respective owners.