 |
 |
This is a DMM of a solar charge type
that enables boosting charge.
A high performance polymer lithium battery with less self-discharge absorbs optical
energy.
Approx.1 hour boosting optical charge enables continious 10 hours use. In addition, safe
management was (has been) designed so as to be capable of having safe feeling because of
being capable of checking a built-in battery and a charge-discharge condition.
Safety management design is made to facilitate checking charge-discharge state of built-in
batteries).
The tester is a genuine solar DMM having an easy-to-read large scale LCD display with a
character height of 17.7mm and a full measuring functions, thus being noticeable in all
portions.
| 1. |
Solar-powered DMM with a
quick-charging polymer lithium battery. Just one hour of solar charging enables 10 hours
of continuous operation. |
| 2. |
1W A resolutions in
both DC and AC 2mA ranges. |
| 3. |
DC/AC 12A ranges. |
| 4. |
Check function enables
monitoring of secondary battery capacity and charge level. |
| 5. |
In-circuit continuity
checking with a beeper and low-power ohms range(0.43V). |
| 6. |
Data hold simplifies
recording of measured values. |
| 7. |
Range hold enables switching
from auto ranging to manual range selection. |
| 8. |
Automatic power-off function
shuts power off 15 minutes after the last operation. |
| 9. |
Large LCD with 17.7mm
character height. |
| Operating principle |
Dual slope
integration |
| Display |
3 1/2digit
in LCD |
| Bar Graph |
Null |
| Range
switch |
Auto range |
| Over
display |
MSB
"1" blinks |
| Polarity
switch-1 |
Auto |
| Low
battery indication |
"BT"
symbol |
| Sampling |
Approx.2
times/sec |
| Bar Graph
2 |
Null |
| Accuracy
guaranteed temperature& humidity ranges |
18~28ºC, 80%R.H. Max. No condensation |
| Operating
temperature& humidity range |
0~40ºC, 80%R.H. Max. No condensation |
| Storage
temperature humidity range |
-10~60ºC, 70%R.H. Max. No condensation |
| Power
supply |
Solar
battery + Polymer Lithium Battery |
| Consuming
power |
Approx.3mW
Typ |
| Operating
time |
12 hours |
| Dimension |
163 x 78 x
30mm |
| Weight |
Approx.185g |
| Instruction
manual |
English |
| Test lead |
TL-61 |
Range |
Accuracy |
Resolution |
Input
resistance |
Maximum
input voltage
(Max. 1 minute) |
DCV |
200mV |
±(0.6%rdg+2dgt) |
100µV |
100MW |
1100V |
2V |
±(1.0%rdg+2dgt) |
1mV |
10MW |
20V |
±(1.0%rdg+2dgt) |
10mV |
200V |
±(1.0%rdg+2dgt) |
100mV |
1000V |
±(1.0%rdg+2dgt) |
1V |
ACV |
2V |
±(0.8%rdg+4dgt) |
1mV |
10MW |
1100V |
20V |
±(1.2%rdg+2dgt) |
10mV |
200V |
±(1.2%rdg+2dgt) |
100mV |
750V |
±(1.2%rdg+2dgt) |
1V |
DCA |
2mA |
±(1.0%rdg+2dgt) |
1µA |
100W |
0.3A/250V(FUSE)
|
20mA |
±(1.5%rdg+2dgt) |
10µA |
10W |
200mA |
±(1.5%rdg+2dgt) |
100µA |
1W |
12A |
±(1.5%rdg+2dgt) |
10mA |
0.01W |
12A
(Within 10 seconds) |
ACA |
2mA |
±(1.2%rdg+4dgt) |
1µA |
10W |
0.3A/250V
(FUSE) |
20mA |
±(2.0%rdg+4dgt) |
10µA |
0.11W |
200mA |
±(2.0%rdg+4dgt) |
100µA |
10W |
12A |
±(2.0%rdg+4dgt) |
10mA |
0.01W |
12A
(Within 10 seconds) |
RESISTANCE |
200W |
±(1.0%rdg+4dgt) |
100mW |
Open circuit voltage :
0.43V |
200V |
2kW |
±(1.0%rdg+2dgt) |
1W |
20kW |
±(1.0%rdg+2dgt) |
10W |
200kW |
±(1.0%rdg+2dgt) |
100W |
2000kW |
±(1.0%rdg+2dgt) |
1kW |
20MW |
±(4.0%rdg+2dgt) |
10kW |
CONTINUITY |
2kW |
±(1.0%rdg+2dgt) |
--- |
Open circuit voltage :
0.43V |
200V |
DIODE TEST |
Open circuit voltage : from 1.1V to 2.2V |
200V |
|
Home
| About Us
| Products
| Telecom Systems
| Contact Us
| E-mail
Bhumika International Inc.
Ph: +1(416) 930 2931
E-mail: info@bhumika.ca
Website: http://www.bhumika.ca
Technical Specifications are subject to change without
notice.
Windows is the registered Trademark of Microsoft Corporation, USA.
All other trademarks are the ownership of their respective owners. |
