 |
|||
 |
|||
|
In this page you can free download the latest version of DMMLink English version for PC100
Digital Multimeter.
The DMMLink application, which runs on Microsoft® Windows95/98 or NT4.0 Workstation,
allows you to record data in your hard drive when your Digital Multimeter SANWA PC100 is
connected to your PC via RS-232C cable. The data recorded can be saved as a CSV format
file, which you can open by applications such as MS Excel, Lotus 1-2-3, or you can record
directly to the MS Excel using DDE function (MS Excel must be installed in your PC). That
feature allows you to use your PC100 in the Auto-Range function.
Common Features
| 1. | Easy to use |
| 2. | Real time graph display with scaled grid |
| 3. | The graph screen can be scrolled and printed directly from DMMLink. |
| 4. | The graph can be copied and pasted from clipboard to word processors and editors. (Also can be saved as *.bmp file format.) |
| 5. | The measured data can be saved in your hard drive as a CSV format with date & data number. |
| 6. | Displays maximum and minimum value with real time and date |
| 7. | An alarm warns you when the measured data exceeds the value you set. |
| 8. | The deviation can be acquired from reference value |
Features newly added to
ver.3.00
| 1. | *Supports LAN and TCP/IP protocol. When DMMLink is installed in both client and host machine and if you work as a client, you can connect to the host and watch the graph that host is measuring. And also using remote control, you can start or stop the measurement that host is doing. (TCP/IP protocol must be installed in both systems) |
| 2. | Temperature measurement function added. (Temperature probe will be available soon.) |
| 3. | Supports shift ranging in auto-range mode. Graph, Comparator, Deviation and Min/Max can be displayed accurately when PC100 is operating in auto-range mode. |
| 4. | Printer port can be used for both comparator result signal output and manual acquisition switch input. |
| 5. | When using clamp probe, the accurate measurement value can be directly displayed and read. (So far, to know the accurate value, the displayed value must have been multiplied by 10 or 100 times.) |
| 6. | 1000-point plot for X-axis in a Graph pane has come to be set. |
| * | The connection via dialup scripting tool is not available. |
Following are the software available here :
Size |
Updated |
||
 |
Version 3.00b (beta edition) |
2407KB |
15/08/99 |
DMMLink ver.3.00 is the
beta version that is limited within 100 hours of continuous use from the time of
installation. It will not run after 100 hours have elapsed.
Since this is the beta version software, please bear in mind that it may cause some errors
in your system. So we would ask you to use it on your own responsibility. SANWA will take
no responsibility on the errors that may be caused after installing this program.
We would appreciate very much to receive any kind of your comment or demand about DMMLink
ver.3.00. If you have any request or find some errors or bugs, please feel free to contact
us at exp_sales@sanwa-meter.co.jp
We intend to respond to your demands as much as possible. We will immediately take up what
we think is important to improve the software.
| How to coexist
ver.2.xx and ver.3.00 You can let DMMLink 3.00 beta version coexist with the older version of DMMLink that is already installed in your system. If you intend to use ver.3.00 temporarily or do not uninstall ver.2.xx and use it continuously, we recommend you to start installing along with the following instructions. Please read carefully. |
|
 |
|
|
|
If DMMLink ver.2.xx is already installed in C:\Program Files\DMMLink, do not install ver.3.00 into the same directory. If you do, the setup will overwrite your existing program and it will not make ver.2.xx run properly. If you want to coexist ver.2.xx and ver.3.00 in the same volume, you must certainly change setup directory other than C:\Program Files\DMMLink. |
| 1. | Create some directory in your hard drive (For instance... C:\dmmsetup), and then download "dmlnk30e.zip" into it. |
| 2. | Extract a downloaded archive by using Winzip® or any other applications that have similar activity. |
| 3. | After extraction executed, you will find 4 files created in the directory. Be sure to put those files under the same directory. |
| 4. | Click "setup.exe" to start install program. |
| 5. | You should execute the install along with the instruction of setup program. |
| 6. | After install program finished, click "Start" button, point "Programs", and then click "DMMLink" to start application. |