Multimode 850nm only

Silicon ZOOM Optical Power Meter (ZOUSFX)

Multimode and Singlemode ready

ZOOM Optical Power Meter (ZOUFX)

850, 1300/1310, 1550nm

The WaveTester is one of the world's most economical and accurate fiber optic link certification power meters delivering professional performance and a complete feature set for optical loss testing in both multimode and/or single-mode networks.

The WaveTester is offered in two models.  The WTUFX is N.I.S.T. Traceable at four commonly used industry standard wavelengths (850, 1300, 1310, and 1550).  This makes it an ideal choice for both multimode and single-mode testing.

The WTUIFX is also N.I.S.T. Traceable at the standard wavelengths, and also comes factory calibrated at 1625nm.

Each model of the WaveTester can store reference values for all of its calibrated wavelengths, and displays optical power as an absolute value in dBm or relative to a user set "zero" reference in dB.  Stored data points contain this reference information, and when data is downloaded into our free OWL Reporter software, the data can be certified using one of many popular cabling standards.  OWL Reporter can also print professional-looking certification reports as proof to customers of a job well done.  OWL Reporter data can also be saved to hard disk for later retrieval.

Other standard features include a backlit, easy-to-read LCD display and a 2.5mm Universal detector port that is compatible with FC, ST, SC, DIN, and any other 2.5 mm ferrule connectors!  No need to maintain expensive adapter caps!  The WaveTester is protected from shock and droppage by an attractive rugged rubber boot.

Click above for WaveTester test kits

• 1mm photo-detector with 2.5mm universal connector
• Multimode and single-mode ready
• NIST Traceable at 850, 1300, 1310, and 1550nm
• Additional factory calibrated wavelengths: 1490nm and 1625nm (WTUIFX model only)
• Configured for measuring optical loss in Fiber To The Home networks
• Separate zero reference for each calibrated wavelength
• Small, hand-held size
• Ergonomic protective rubber boot
• Up to 100 stored data points
• Long battery life - over 250 hrs on one 9v battery
• Large backlit LCD display allows accurate readings in dBm, dB, and microwatts
• Battery life, stored data, and power units indicator
• Simple 4-button operation
• Measurement range: +5 to -60 dBm
• Absolute accuracy: +/- 0.15 dB
• Resolution: 0.01dB

The Micro OWL™ is one of the world’s smallest optical power meters to offer so many features, including a 0.15 dB accuracy over its normal operating range.  It is as feature-packed and accurate as optical power meters costing hundreds of dollars more.  This combination of features, size, accuracy, and price make it a tremendous value for the optical fiber professional.

The Micro OWL™ is a high accuracy, high resolution, microprocessor controlled, optical power meter.  It has an small handheld case made from high impact plastic, a backlit, graphic, liquid crystal display, and 18-key keypad for easy data entry.  It can be ordered with a integrated 850nm or 1300nm light source.  The meter will operate for over 100 hrs on a standard 9v battery and has built in auto shutdown.

The Micro OWL™ includes a built-in Fiber Loss Wizard that helps you easily calculate the allowable loss for the fiber runs that you will be measuring.  The meter stores physical fiber characteristics for four different locations, or links.  This includes: link name, date, fiber type, fiber length, connectors, splices, temperature, and calculated or entered reference power values for three wavelengths.  In addition the meter will store up to 1000 measured data points with labels. Each value includes the fiber type and link.  The stored information can be selectively viewed, edited (measured again), printed, or deleted.  The meter will print formatted reports of selected stored data directly using the built in serial port, or all of the stored data can be downloaded to our free OWL Reporter™ data management and reporting software.

Click image for Micro OWL test kits

• 1mm photo-detector with 2.5mm universal connector
• Multimode and single-mode ready
• NIST Traceable at 850, 1300, 1310, and 1550nm
• Separate zero reference for each calibrated wavelength
• Small, hand-held size
• Ergonomic protective rubber boot
• Built-in Loss Wizard certifies fiber links using TIA-568-B fiber optic link parameters
• Up to 1000 stored data points
• Serial Data Interface
• Free OWL Reporter Software
• Long battery life - over 100 hrs on one alkaline 9v battery
• Large backlit LCD display allows accurate readings in dBm, dB, and microwatts
• Battery life, stored data, temperature and power units indicator
• Versatile 18-keypad operation
• Measurement range: +5 to -70 dBm
• Absolute accuracy: +/- 0.15 dB
• Resolution: 0.01dB

The Fiber OWL 2 line of power meters has been replaced by the Fiber OWL 4.  Enhancements include a more user friendly interface and auto-wavelength recognition which allows for dual-wavelength reference and data storage.

See the table below for the ordering information and product equivalents.

The Fiber OWL 4 is a high accuracy, high resolution, microprocessor controlled optical power meter.  It has an attractive handheld case made from high impact plastic, a large, backlit, graphic, liquid crystal display, and 18-key keypad for easy data entry.  The 2.5mm fixed universal fiber adapter accepts 2.5mm connectors, such as ST, SC, and FC.  It will operate for over 100 hours on a standard alkaline 9v battery and has built-in auto shutdown.  An optional length testing light source can be installed for fiber optic link length measurements.

The Fiber OWL includes a built-in link wizard that easily calculates the allowable loss for the fiber runs being measuring.  The meter stores physical fiber information for up to eight links.  Link information includes: link name, date, fiber type, fiber length, connectors, splices, temperature, cabling standard, and calculated or entered reference power values for two wavelengths. 

In addition the meter will store up to 1000 measured data points with labels.  Each value includes the fiber type and link.  The stored information can be selectively viewed, edited (measured again), printed, or deleted.  The meter will print formatted reports of selected stored data directly using the built in serial port, or all of the stored data can be downloaded to our free OWL Reporter software.  

• Multimode and singlemode ready
• NIST Traceable wavelengths: 850, 1300, 1310, 1550nm
• Additional factory calibrated wavelengths: 980, 1490, 1625nm
• One user-definable wavelength: between 700 and 1700 nm
• Link Wizard certifies fiber links using fiber loss parameters from popular industry standards, including Fiber To The Home (FTTH), TIA-568 and Ethernet
• Two user-definable standards
• Optional integrated length testing light source (Fiber OWL 4 BOLT)
• Auto-wavelength recognition (when used with OWL WaveSource light sources)
• Automatic dual-wavelength reference storage and data storage
• Stores information for up to 1000 data points in 8 different link configurations
• Serial interface for downloading and/or printing data
• Free OWL Reporter software (PC) for printing professional certification reports
• High resolution - 0.01 dB
• High accuracy - 0.15 dB
• 75 dB dynamic range
• 2.5mm fixed universal connector port (ST, SC, FC)

• Long battery life: over 100 hrs. on a 9v alkaline battery

• Large backlit LCD display
• InGaAs detector
• High impact plastic case

The FO-4CFX and FO-4BCFX contain a filtered detector typically used for telco and other high-power application testing.  Contact us at info@bhumika.ca or at +1.416.930.2931 and we'll help you find the right meter for your needs.