Digital Speed Meter SE-9000/SE-9000M General Information ■ For liner speed of elevator, and rpm(s) of motors ■ Analog output connectable to recorder ■ LED display easy to read the value in the dark place ■ 2 ch. display to compare data (isolated data hold function) ■ Auto power off function ■ External hold terminal for remote control Standard Accessories Included ■ SE-9000 ■ Speed ring thickness 10mm (SE-10) x 1 ■ Speed ring thickness 0.9mm (SE-0.9) x 1 ■ Cord for hold input (SE-L-H) x 2 ■ Cord for analog output (SE-L-O) x 1  ■ Hex wrench x 1 ■ Carrying case (C-SE) x 1   ■ SE-9000M ■ Speed ring thickness 10mm (SE-10) x 1 ■ Speed ring thickness 0.9mm (SE-0.9) x 1 ■ Cord for hold input (SE-L-H) x 2 ■ Cord for analog output (SE-L-O) x 1  ■ Hex wrench x 1 ■ Carrying case (C-SE) x 1 ■ External encoder (speed ring) Optional Accessories ■ Contact adapter (SE-R) for measurement of revolution   Fore more information about accessories, click here... General Specification Measuring range 0 ~ 1999.9m/min 4-digit Red LES display (2 ch.) (Max 999.9) LED at upper left in the display will blink when the measured value exceeds 1000m/min. Measuring time 0.2 sec (Sampling time) Accuracy ±2 count Analog output DC 0 ~ 1999.9mV (at 0m/min ~ 1999.9m/min) Analog output impedance : approx 100Ω Analog output accuracy : ±(0.5%rdg+1mV) Data hold Ch.1, Ch.2 isolated. Operation by main switch or external hold switch. Auto power off After 3 minutes of no operation Battery R6P x 4 (with battery alarm) Allowable load Radial 5kg, Thrust 2kg   Operating temperature 0ºC ~ 40ºC 80% RH max.  No condensation Dimension 50(H) x 50(W) x 174(D) mm Weigh Approx. 480g Warranty ( years ) 1

SE-9000/SE-9000M   Measuring speed of elevator  2 ch display     Remote Control   ■ SE-9000   By using SE-L-H cable, 1 & 2 ch. display can be held by remote control.   ■ SE-9000   By using SE-L-O cable, measuring value can be seen by M53.   ■ SE-9000M   By using external encoder, measuring value can be monitored by SE-9000M.

Home     |     About Us     |    Products     |    Telecom Systems    |    Contact Us    |    E-mail

Bhumika International Inc.
CANADA
Ph: +1 (613) 619 0894
E-mail: info@bhumika.ca  
Website: http://www.bhumika.ca

Technical Specifications are subject to change without notice.
Windows is the registered Trademark of Microsoft Corporation, USA.
All other trademarks are the ownership of their respective owners.