Intelligent E1 Channel Bank, PRI (Euro ISDN) ISDN Multiplexer, E1 Drop-Insert Multiplexer
   E1 Echo Cancellers
   Technical Specifications
 

Echo Cancellers
  T1 Echo Cancellers-1U Version
Product Brochures (PDF)
 

E1 Echo Canceller - Desktop
T1 Echo Canceller - Desktop
E1 Echo Canceller - 1U version
T1 Echo Canceller - 1U version
8, E1 Echo Cancellers (VQE)
8, T1 Echo Cancellers (VQE)
E1 Echo Canceller - 3U version
T1 Echo Canceller - 3U version
E1 Echo Canceller-High-Density
T1 Echo Canceller-High-Density
DS3 Echo Cancellers

Other Products
  Multiplexers
Channel Banks
Voice Compression
Echo Cancellers
T1 E1 Converter
Test Instruments
  Digital Multimeter
Analog Multitester
Clamp Meter
 

VCL-EC128-E1, Voice Echo Canceller is a fully integrated 24-channel echo canceller that cancels echo of up to 128ms. Each of the 24 channels cancels echoes up to 128ms with disable tone detection and meets ITU-T G.165 and ITU-T G.168 requirements for echo cancellation. E1 Inputs and E1 Outputs are balanced 100 Ohms, RJ-45.

E1, VCL-EC128, Voice Echo Canceller - Technical Specifications

Provides voice echo cancellation of up to 64ms / 128ms, User Selectable
Meets ITU-T G.164 and G.165 and G.168 recommendations.
Non-Linear Processor with Comfort Noise Insertion
Redundant Power Supply (Optional)
E1 Circuit by-pass in the even of power supply failure.
Fully integrated independent 30-channel voice echo canceller
Supports Signaling: 30B+D PRI ISDN (Euro ISDN) , 31B (31 voice channels) with out-of-band, R2 CAS, SS7 - User Selectable

E1 Interface at 2048 Kbps

Number of Interfaces                 2,
1 - Input (RJ-45)
1 - Output (RJ-45)
Conformity                          G.703
Frame Structure                     As per ITU (CCITT) G.704    
Signaling                         Pass-Through
PCM Sampling Rate                     8000 Samples / sec
Encoding Law                     A Law as per ITU (CCITT) G.711
Bit Rate                         2048 Kbps ± 50 ppm
Code                           HDB3
Nominal Impedance                     120 W balanced
Peak Voltage of a mark For 120 W Balanced interface            3.0 V ± 0.3 V
Peak Voltage of a space for 120 W Balanced interface             0 V ± 0.3 V
Nominal Pulse Width                 244 ns
Pulse Mask                         as per ITU (CCITT) Rec. G.703
Output Jitter                        < 0.05 UI (in the frequency range of 20Hz to 100 Khz)
Permissible Attenuation                 6 dB at 1 MHz
Return Loss at:                    
51.2 KHz to 102.4 Khz                     > 12dB
102.4 KHz to 2048KHz > 18dB
2048KHz to 3072 Khz > 14dB
Jitter Tolerance                     As per ITU (CCITT) G.823
Loss and recovery of frame alignment :   As per clause 3 of ITU (CCITT) G.732
Loss and recovery of multiframe alignment :   As per clause 5.2 of ITU (CCITT) G.732

Echo Cancellation

Echo Tail Cancellation Up to 64ms Bi-Directional / 128ms Uni-Directional - User Selectable
Tone Disabler As per ITU-T G.164, G.165
ERLE (Echo Return Loss Enhancement) >35dB (with 6dB ERL) at 10dBm0 input
>65dB with NLP enabled
ERL (Echo Return Loss) Selectable Levels Options : 0, 3, 6 dB
Transmit / Receive Levels (Programmable) Selectable Levels Options: -12, -9, -6, -3, ,0 +3, +6, +9
Comfort Noise Insertion User Selectable - Enable / Disable
Local Monitoring and Control RS232 serial interface for Management through a PC COM Port
Remote Monitoring and Control Ethernet (10BaseT) interface for remote LAN Management and Control
Local and Remote Provisioning CLI (text commands) and GUI
Front Panel Indicators -    In SYNC / Failure
-    Individual Card
-    LEDs for power on/off
Power Supply Redundancy Optional: -48VDC Power Supply (1+1)
Environmental-Operational 0° C to 50° C
Humidity 5% to 95%, non-condensing

 

NMS (with Telnet)
xPort Specifications

 

Network Interface RJ-45 Ethernet 10BaseT or 100BaseT-TX (auto sensing)
Compatibility Ethernet Version 2.0 IEEE802.3
Protocols Supported

ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP,

BOOTP, TFTP, Auto IP, SMTP and HTTP

LEDs 10Base-T & 100Base-TX Activity, Full/half duplex.
Management Internal web server, SNMP (read only), Serial login, Telnet login
EMI Compliance

Radiated & conducted emissions - complies with Class B limits of EN 55022:1998

Direct & Indirect ESD - complies with EN55024:1998

RF Electromagnetic Field Immunity - complies with EN55024:1998

Electrical Fast Transient/Burst Immunity - complies with EN55024:1998

Power Frequency Magnetic Field Immunity - complies with EN55024:1998

RF Common Mode Conducted Susceptibility - complies with EN55024:1998

 
Mechanical Specifications
Rack Mounting Standard 19 Inch. DIN Rack
Height 133.35mm
Depth 292mm
Width 482mm
Weight (Net) 7.50 Kg. (10, Echo Cancellers)
 
Echo Canceller Technical Specification
  • Provides voice echo cancellation of up to 64 / 128ms.
  • Conforms to ITU-T G.165 and G.168
  • G.164 / G.165 disable tone detection
  • Non-Linear Processor with Comfort Noise Insertion
  • Narrow-Band Detector

  • Eliminates long echo tail.

Others Echo Cancellers Solutions:

Technical Specifications are subject to change without notice.
Windows is the registered Trademark of Microsoft Corporation, USA.
All other trademarks are the ownership of their respective owners.

Home  |  About Us  |  Products  |  Testing Instruments  |  Contact Us  |  E-mail


Bhumika International Inc.
812 - 350 WEBB DRIVE,
MISSISSAUGA, ONTARIO, L5B3W4,
CANADA
PHONE#: + 1 (416) 930 2931
E-mail: info@bhumika.ca
Website: http://www.bhumika.ca