|
The VCL-MegaConnect, 32 Port E1 / T1 Monitoring Groomer is also
available for special non - obtrusive monitoring applications in which E1 / T1 ports can
be connected to monitoring / billing equipment for non-obtrusive monitoring of live
traffic or signaling, required by billing servers etc.
In the monitoring mode the GROOMER provides the user a
total of 32, E1 / T1 Ports. 30, E1 / T1 Ports shall connect to the “Live
Traffic” E1 / T1 links which are to be MONITORED, NON-INTRUSIVELY (Hi-Z) in both
Transmit and Receive directions. 2, E1 / T1 Ports shall connect to the MONITORING
EQUIPMENT, such as billing servers etc.
The GROOMER (E1 Monitoring DACS) is capable of monitoring a
-20dBdsx (0.3Volt Pulse) E1 signal through a Hi-Z path, without in any way distrubing
the live E1 / T1 traffic that is required to be monitored. The E1 connector(s)
shall be RJ45 (120 Ohms) and a "Y" cable is provided (included) to
connect E1 / T1 GROOMER equipment to the E1 / T1 Ports that are required
to be monitored.
The VCL-MegaConnect, 32 Port E1 / T1
Monitoring Groomer, occupies only a 6U high rack-space, and is a complete 19-inch
standalone unit. The unit operates on a -48VDC input power-supply (AC input adapter is
optional for AC mains operation).
The system is supplied with an easy to use
Windows (95, 98, Me, XP) Graphical User Interface that provides the USER a complete
control to prepare multiple configuration "maps" and store them as easy
to read data files. It may also accessed using CLI (Command Line Interface) through a
Serial (COM) Port of a PC using HyperTerminal text commands. Dry contact relay alarms are
also available at rear of the system to connect the system to external audio and visual
alarms outputs.
The VCL-MegaConnect, 32 Port E1 / T1
Monitoring Groomer also has a TCP - IP Access feature which allows the DACS to be
connected on a TCP - IP network (10/100 Base Interface) for remote access for
configuration and monitoring using Telnet.
Applications:
- 32 Port E1 / T1 Monitoring Groomer
- Monitoring of “Live Traffic” on E1 / T1 links
which are to be MONITORED, NON-INTRUSIVELY (Hi-Z) in both Transmit and Receive directions.
Indications and Alarm Monitoring:
- Loss of incoming signal at any E1 / T1 Port
- Configuration Error Alarm
- Clock Status
- 1 to 8 channel LED indicators to indicate the status of each
E1 / T1 channel
- +3 Volts Power Supply
- -48VDC present
Configuration Error
Programmable Features:
- Specifying the priority sequence for clock selection.
- Enabling or disabling E1 / T1 channels (masking) of the E1 /
T1 channels that are not is use.
- Creating a cross - connect between E1s at DS-O level (Single
time-slot level) using the Windows based, easy to use GUI.
- Telnet interface for remote programming.
Status Monitoring:
|
