|
Technical Specifications
-
Multiple
Services from E1, E3, STM-1, STM-4
-
STM-1/4
VCL100 STM-1/4 (upto 252 E1)
-
E1/DS1s
-
E3/DS3s
-
E4/STM-1
electrical
-
STM-1
optical
-
E1, E3
and Ethernet over SDH
-
GigE
-
Cost
effective
|
 |
The VCL100 STM-1/4 is a modular
and cost effective STM-1/4 SDH multiplexer equipment designed to
manage bandwidth and voice & data access services over STM
networks. The products are designed to support end-to-end
provisioning and management of services across all segments of
the optical network. It combines innovative optical networking
software with the intelligence of SONET / SDH to deliver a
flexible, cost-effective network solution.
The VCL100 STM-1/4 provides
flexibility to the customers in terms of expansion to support
additional client interfaces by adding new modules in the field.
It is also a scalable system that enables the customer to start
with an STM-1 network and upgrade to STM-4 as the traffic demand
increases.
The distinguishing features of VCL100 STM-1/4 over competing
products are its unprecedented port density, scalability,
redundancy and upgrade-ability with its software intelligence.
The VCL100 STM-1/4 family of products can be managed through an
integrated NMS that manages all STM equipment, providing
customers with end-to-end provisioning from a single platform
for multiple service types – from E1s, E3s, STM-1, STM-4, and
10/100Mbps Ethernet services.
The STM-1 / STM-4 can be managed
through an integrated NMS that manages all the equipment,
providing customers with end-to-end provisioning from a single
platform for multiple service types - from E1/DS1s, E3/DS3s,
E4/STM-1e, STM-1o and 10/100Mbps Ethernet services.
| Network
Topology |
|
Network
Element
Configurations |
- Single/Dual Terminal Multiplexer (Dual TMUX)
- Add Drop Multiplexer (ADM)
- Regenerator
- In-Line Amplifier
- Cross Connect
|
| Line Side
(Aggregate) Optics |
- 2 X STM-1/4 1310 or 1550 nm (ITU-T G.957 Compliant)
- S/L 1.1, S/L 1.2, S/L 4.1, S/L/V/U 4.2
- L 1.2JE, L 4.2JE (Joint Engineering)
|
| Tributary
Interfaces |
- E1/E3/E4 Electrical
- STM-1o/STM-1e
- 10/100 Ethernet
|
| Modularity |
- Modular in design, capable of upgradation to STM-4
- Separate aggregate and tributary cards
- Mix and match tributaries – E1, E3, DS3, E4,
STM-1o/e, 10/100 Ethernet
|
| Cross Connect |
- 252 X 252 VC-12/ 1008 X 1008 VC-12
- Fully non blocking
- Line to Line, Line to Tributary, Tributary to Line,
Tributary to Tributary
|
| Protection |
- SNCP/ 1+1 MSP (as per G.841)
- VC-12, VC-3, VC-4 level path protection
|
| Optional
Hardware Redundancy |
- Power Supply Card
- Processor Card
- Cross-connect Card
- Aggregate Card
|
Maintenance
|
- Higher-order and Lower-order POH, SDH level alarms
and performance monitoring (as per G.826 and G.784)
- Local & remote loop back
- Software Downloads
|
| Management |
- Element Management System: NES ( Network
Element Software), supports full FCAPS functionality.
- RS-232 port for craft interface
- V.24/V.28 Modem interface for remote management
- In-band control supported using SDH Overhead
- 10/100Base-T/RJ45 management interface
- Alarm Signaling Indicators and External Contacts
|
Power Supply
|
- Power Input: -48V DC nominal, -36V to 60V DC
- Power consumption: less than 100W
|
| Timing &
Synchronization |
- Timing & Synchronization of System (as per G. 813)
- Internal and External Timing interfaces: Two E1 BITS
interfaces (G.703)
- Internal oscillator capable of supplying a G.813
compliant Stratum-3 SEC
- Support of SSM byte
|
| Order wire
support and user data channel |
- E1 / E2 bytes used for Express order wire (Omnibus/
Selective calling facilities)
- F1 byte for user data channel
|
| Physical
Dimensions |
- Dimensions (H X W X D): 267 mm x 462 mm x 280
mm (10.5 in x 18.2 in x 11 in); Can be mounted on a
19” or 23” or 600mm rack
- Weight: 2.5 Kg (6 Kg fully loaded)
|
| Environmental |
- Operating Temperature 0° to 50° C
- Relative Humidity 10% to 90%, non-condensing
|
Related Links
|
